- 您现在的位置：买卖IC网 > Sheet目录321 > DM300024 (Microchip Technology)KIT DEMO DSPICDEM 1.1
dsPICDEM? 1.1 Plus Development Board User’s Guide
? Data Converter Interface – Interfaced to an external Si3000 voice band Codec for
transmission of DTMF PCM signals
? INTx pins – Used for detecting switch SW1-SW4 inputs
? Hierarchical/Prioritized Interrupt Control with nesting enabled
3.4
DATA AND CONTROL FLOW
3.4.1
Power-up Sequence
TABLE 3-3:
POWER-UP PERIPHERAL INITIALIZATION SEQUENCE
DS70099D-page 36
Seq
1
2
3
4
5
6
7
8
9
10
11
12
13
Module or Function
Timer1
Timer2
Timer3
Timer4 and Timer5
Interrupt Service
Routine (ISR)
UART2
SPI 2
Data Converter
Interface (DCI)
Si3000
DCI
External interrupt
pins INT1-INT4
12-bit ADC
Interrupts
Initialization Process
Configured to count to 125 μS, but not enabled.
Configured to count to 1 second using a 256:1 prescaler
setting.
Configured to count up to 1.14 seconds using the 256:1
prescaler setting.
Configured to operate in the 32-bit Timer mode, but not
enabled until needed.
Processing is enabled for Timer2 and Timer3.
Both the transmitter and receiver are configured for
interrupt-driven operation at 57600 baud.
Initially configured to operate in an interrupt-driven mode at
F CY /8 Hz (where F CY = 7.3728 MHz). The module communi-
cates at F CY /8 Hz in 8-bit mode while displaying results on the
LCD controller. When it is used to step the MCP41010, it
operates in the 16-bit mode at F CY /32 Hz.
Configured for Master mode. Initially configured to use two of
four buffers. Transmits/receives in time slot 1 at the frame rate
of 7200 Hz for configuring the Si3000 external voice band
Codec.
Configured for Slave mode. The Si3000 line and speaker
ports are enabled. Signal attenuation is set to 0 dB. The ADC
input from the Si3000 is attenuated by 34.5 dB and is not used
in this demo.
Re-initialized to operate with all four buffers in interrupt-driven
mode for transmitting DTMF PCM words to the Si3000 Codec.
Configured to interrupt on the falling edge and used for
switches SW1-SW4, respectively.
Configured to operate at 16000 Hz sampling rate and gener-
ate an interrupt every 16 sample-convert sequences. The
ADC samples channel AN3 (sine wave), AN4 (RP2), AN5
(RP3), AN6 (RP1) and AN8 (temperature sensor U9).
Peripheral interrupts are configured. Nested interrupts are
enabled.
? 2006 Microchip Technology Inc.
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
DM330012
KIT USB STARTER FOR DSPIC33E
DM330013
MICROSTICK DSPIC33F/PIC24H BOARD
DNET1
SURGE SUPPRESSOR ETHERNET RJ45
DR-8094
RACK DOUBLE 84"X20.25"X36" BLK
DR-IAC5E
INPUT MODULE AC 5VDC
DRIDC24A
INPUT MODULE DC 34MA 24VDC
DRODC24
OUTPUT MODULE DC 13MA 24VDC
DRR-40A
MODULE REDUNDANCY 40A DIN RAIL
相关代理商/技术参数
DM300027
功能描述:开发板和工具包 - PIC / DSPIC 16-bit Starter Demo Board RoHS:否 制造商:Microchip Technology 产品:Starter Kits 工具用于评估:chipKIT 核心:Uno32 接口类型: 工作电源电压:
DM-3-000-K
制造商:PacTec 功能描述:Case, Plastic; ABS; Black; 11.46 in.; 3.38 in.; 10.4 in.; UL 94-HB Rated 制造商:PacTec 功能描述:ENCLOSURE, DESKTOP, PLASTIC, BLACK; Enclosure Type:Desktop; Enclosure Material:Plastic; Body Color:Black; External Height - Imperial:3.38"; External Height - Metric:86mm; External Width - Imperial:10.4"; External Width - Metric:264mm;RoHS Compliant: Yes
DM-300-C
制造商:Greenlee Textron Inc 功能描述:DMM 1000V RMS
DM-301
制造商:Labfacility Limited 功能描述:SENSOR PT100 THIN FILM 2X2.3MM CL B 制造商:LABFACILITY 功能描述:SENSOR, PT100, THIN FILM, 2X2.3MM, CL B 制造商:LABFACILITY 功能描述:TEMPERATURE RTD SENSOR, -70C to +500C, 100 OHM; Sensing Temperature Min:-70C; Sensing Temperature Max:+500C; Resistance:100ohm; Sensor Terminals:Through Hole; Temperature Sensing Range:-70C to +500C ;RoHS Compliant: Yes
DM30103J
制造商:ELMCO 功能描述:
DM30113G
制造商:n/a 功能描述:DM30X311 S7C8B
DM30-113G
制造商:n/a 功能描述:DM30X311 S7C8B
DM30133J
制造商:n/a 功能描述:DM30X313 S7C8B